Lap Steel
Lap Steel
 |
 1940s Dickerson lap steel nice  US $168.00
|
 LAP PEDAL STEEL GUITAR STEVENS CONTOUREED HEAVY SLIDE US $19.99
|
 Lap Steel Fretboard w MOP Inlay Scale 20757 US $45.00
|
 Vintage Kalamazoo Lap steel Works US $102.91
|
 Vintage Nick Manoloff Bakalite Lap Steel Electric Guitar Slide Bar US $32.77
|
 Vintage oahu steel lap guitar US $178.00
|
 Blues Lap Steel Dobro Lessons For Guitar Players DVD US $11.95
|
 Lap Steel Guitar Fretted Fretboard w MOP Inlay 8 US $55.00
|
 1959 SILVERTONE Lap Steel Electric Guitar US $259.00
|
 Vega Lap Steel 7 String US $75.00
|
 Lap Steel Fretboard w MOP Inlay Scale 2126 US $45.00
|
 1942 GIBSON EH 150 LAP STEEL GUITAR WITH ORIGINAL CASE US $699.99
|
 Lap Console Steel Guitar Design Construction 20 US $29.95
|
 Rogue EA 3 Lap Steel Guitar with Stand and Gig Bag US $59.99
|
 Lap Steel Fretboard w MOP Inlay Scale 1734 US $55.00
|
what is formula 4 safety margin in steel beam?
two cold drawn bars (AISl steel)bolted together as a lap joint.The bolts are (ISO 5.8)200mm from one end and 450mm from the other and are 50mm apart.Centre of beam is 350 mm from end
Please visit:
http://www.efunda.com/formulae/solid_mechanics/columns/calc_column_structural_steel.cfm
The factor of safety (FS) is equal to the input cohesion (C) plus the effective normal stress acting on a plane (sigma prime sub n) times the tangent of the angle of internal friction (Phi), all divided by the reduced cohesion (C sub r) plus the effective normal stress acting on a plane (sigma prime sub n) times the tangent of the reduced angle of cohesion (Phi sub r).
http://www.answers.com/topic/factor-of-safety-1
Blue Steel
Blue Steel
|
 STAINLESS STEEL BLUE TONE LIZARD HOOP EARRINGS e910 US $.95
|
 Mens Blue Stainless Steel Zodiac Ring Pendant Necklace US $.99
|
 R0429 Men Charm Dragon Stainless Steel Blue Ring Sz 9 US $.99
|
can anyone give me a picture of a smith and wesson handgun small frame, blue steel, with hammer?
it needs to be
*smith and wesson
*small frame
*with hammer
*blue steel
Here's a few
Solid Steel
Solid Steel
|
 Solid Stainless 308 Steel Wire 18 gauge Round 15 Feet US $3.00
|
 Solid Stainless 308 Steel Wire 21 gauge Round 25 Feet US $3.75
|
 Solid Stainless 316 Steel Wire 24 gauge Round 50 Feet US $3.75
|
How to Add on to Half Steel Buildings
A steel building is an economical way to add value to your property or create storage or meeting space for your personal or commercial needs. Steel buildings today can be customized to any size, design, or shape to meet your needs. They are weather and pest resistant, stronger than most wood buildings and low on maintenance. If you have an existing steel building structure, you can easily expand this building anytime with half steel building units that attach to the structure of the existing building. Steel buildings come in a wide range of pre-fabricated as well as custom-made options to suit any budget or need.
If you have an existing steel building on your property and want to expand it to accommodate a larger interior storage or other purpose area, then you can add on to the structure with half steel units. These units are a great way to add volume and storage capacity to your steel building. You can create new bays for different purposes, like departments, offices, equipment and product storage or even vehicle maintenance areas. Half steel units can also be used to increase the structural safety of your building by providing additional protection from the external elements that can wear down the materials used in steel buildings. You can upgrade both the look and the structure of your steel building with half steel units. Here are some different ways you can add on to half steel buildings.
Roof Extensions
While this may be a more costly method of adding onto half steel buildings, this is also the best way to ensure that the addition will last longer and reduce the chances of water build-up and corrosion from developing. A roof extension is just that, it's a section of additional roofing that is attached to the existing roof at the same level, and then walls are added at a slight slope from the roof to support it. This is a great way to add onto your building if you need high ceilings or a lot of storage space for special equipment.
Expandable Endwalls
If your metal building is constructed with expandable endwalls, you can easily adjust the size of your building by expanding them and adding on half steel partitions to the sides of back of your building. This is an important thing to consider when building your original structure, if you plan to expand it in the future.
Secondary Framing
If you want to safely add half steel units to your building, then you will want them to anchor directly to the secondary framing that are sometimes called 'struts' that are under the roof supports. These can be extended and half steel units installed directly to them. This reduces the chance of the building collapsing under too much weight or extreme weather conditions.
With careful planning and solid construction techniques, you can safely add half steel units to your steel building and expand its use for future needs. Be sure to use a reputable manufacturer and crew when completing this type of project.
Drill bits that will drill through solid steel?
I bought myself a door frame mounted pull-up bar, but here's the problem... My door frame is made out of solid steel. I have a set of Black & Decker drill bits I bought at Home Depot, and they are advertised on the package to be "General Purpose". It says they will drill through metal, wood, etc... but in reality, they just get hot, and lick against the tough steel, not being able to drill even half an inch through! Honestly I don't know what kind of drill bits I need for the task at hand. Where can I get what I need? What are such drill bits called? Can someone give me a link? I'd like to order online because Home Depot sales reps are rude, and unhelpful.
The drill bit was probably adequate, but drilling at high speed may have ruined it. When drilling through metal, use low speed and high pressure. Push on the drill. The metal will come off the bit in little curls.
Steel Block
Steel Block
|
 Steel Block Tremolo for Mexican Fender Strat Chrome US $32.95
|
 SCHAEFER TRIPLE BLOCK STAINLESS STEEL US $170.00
|
 BIG BLOCK CHEVY STEEL CORE REUSEABLE VALVE COVER GASKET V8 396 427 454 502 BBC US $8.95
|
Blasting Away: Steel Building
There are three general uses of the term "Blast" in the making of steel.
It's hard to overstate the importance of the steel industry in the United States, especially in the late 1800's and early 1900's. This article gives a glimpse of insight into one critical area of steel making: Blasting.
First, it is the name given to air under pressure used for purposes of combustion, etc., as in the blast furnace or the Bessemer converter; in some cases for cooling purposes, as in the case of tools. If preheated, it is termed hot blast or warm blast; if not preheated, cold blast. A blast under considerable pres- sure is sometimes referred to as a cutting blast; if weak, a soft blast.
Blast Box. - Of a Bessemer converter: A shaft furnace supplied with blast for producing pig iron by smelting iron ores. It is continuous in operation, the solid raw materials being charged at the top, and the molten pig iron and slag tapped out at the bottom at intervals. Large furnaces are about 80 to 200 feet high, have an output up to 600 or 700 (commonly 300 to 600) tons per day, and employ blast at a pressure of 5 to 25 (usually 1 to 15) pounds per square inch, and at a temperature of about 900° to 1400° F. (485° to 7600 C.) The modern equipment consists essentially of the furnace proper or stack; blowing engines for compressing the air for the blast; stoves for preheating the blast; appliances for charging the raw materials; and a cast house for disposing of the molten iron.
Stack. - There are three well defined divisions, usually circular - practically never oval or square - in section. At the bottom is the hearth (well, laboratory, or crucible) of cylindrical shape; above this the walls diverge, forming an inverted truncated cone, called the bosh (also the name for the greatest diameter of the furnace), above which the walls converge to the top (throat or mouth), forming another truncated cone set upright. In a furnace with saucer bosh or belly walls, the walls above the bosh, instead of being straight, are slightly convex. The furnace is built of fire-brick (cold blast furnaces are built of stone), usually but not always encased in a general steel (http://www.steeldeal.com/) jacket extending part or all the way up. The section above the bosh is supported on a mantle (mantel) ring (lintel plate) and columns. Up to a certain distance from the bottom of the furnace the walls are protected from corrosion by cooling plates of bronze or other metal through which water circulates. Sometimes water is caused to flow down the outside.
Blast. - Formerly the blast was always used cold (hence the term cold blast) but this practice is now restricted to a few small furnaces, as a rule employing charcoal for fuel. Hot blast was introduced by Neilson about 1828, and affected a great economy in fuel. The blast is introduced near the bottom of the bosh through a number of pipes or tuyeres (twyers, tweers) which are protected from burning by being encased in water-cooled metal castings (tuyere blocks). The overhang of a tuyere is the amount it projects into the furnace beyond the inner wall.
Of course, modern steel making uses much more sophisticated, computer-aided technologies, but the basics, as described above, remain.
How much work must you do to push a 10 kg block of steel across a steel table at a constant 1.0 m/s for 3.0 s?
The coefficient of kinetic friction for steel on steel is 0.60.
Answer is 180.. but HOW do you do this??? I need steps and a good explanation.
work = force x distance
distance = velocity x time
You are given the velocity and the time so you can compute the distance. Next you need to compute the force.
Since your velocity is constant, the net force is 0. Thus the force you exert must equal the force of friction.
Force of friction = normal force x coefficient of friction
You are given the coefficient of friction. The normal force is just the weight of the block (not its mass; its weight). You have the mass and so can compute the weight. With that and the coefficient of friction, you can compute the frictional force. With that and the distance, you can compute the work done.
Stainless Steel
Stainless Steel
|
 Men Black Size 8 Stainless Steel Love Cross Ring RU9271 US $.99
|
 Mens Silver Stainless Steel Chain Bangle Bracelet SU573 US $.99
|
 I LOVE YOU Mood Stainless Steel Band Ring Size 9 US $5.99
|
 Mens Black Stainless Steel Cross Pendant Necklace Chain US $.99
|
 4 N1 Stainless Steel 25 Inlet Catback Exhaust System US $135.00
|
 5 Global Cromova 18 Stainless Steel Knifes and base US $155.00
|
Will Stainless Steel Kitchen Appliances Suit My Kitchen?
Stainless steel is convenient and easy to clean, but you may be afraid that in choosing stainless steel, you will lose the character of your kitchen. Stainless steel does not stain, corrode or rust as easily as ordinary steel. Stainless basically means that it ‘stains less’ not that it is stain proof, so do not think that no matter what falls on it, it will not stain. This is not the case. But it is far more stain resistant than many other materials used in domestic appliances.
There are different grades and surface finishes of stainless steel to suit the environment to which the material will be subjected in its lifetime. Common uses of stainless steel other than in kitchen appliances are in cutlery and watch straps. Stainless steel is also less prone to corrosion and rust than many other types of finish. This is because it has a sufficient amount of chromium present so that a passive film of chromium oxide forms, which prevents further corrosion.
Stainless steel's resistance to corrosion and staining, its low maintenance and relative cost effectiveness make it an ideal base material for a host of commercial applications and domestic appliances. Added to the fact that stainless steel is 100% recyclable, the advantages of stainless steel do seem to be pretty high in number. In fact, an average stainless steel object is composed of around 60% recycled material, 25% originating from end-of-life products and around 35% coming from manufacturing processes.
Another of the main benefits as regards style of a stainless steel kitchen is that it is easy to find stainless steel kitchen appliances that match each other so co-ordinating a kitchen is made far easier. A stainless steel themed kitchen also has a modern feel to it and because it is easier to clean than a lot of other finishes and does not corrode easily it looks smarter and newer for longer.
Most manufacturers provide kitchen appliances in a stainless steel finish including AEG, Electrolux, Zanussi, Neff, Hotpoint and others. They usually offer a range of styles and a choice of matching appliances so that your kitchen is coordinated.
A problem with stainless steel is that it is not to everybody’s taste. It can look cold, sterilised and impersonal, which is fine in a professional or ultra modern kitchen, but for a traditional kitchen, is not the feel that you are usually going for. But a lot of the time, the mood of your kitchen is defined more by how you mix the types of cupboards and the colours of other features in your kitchen with the stainless steel kitchen appliances.
Stainless steel will look more attractive if your cupboards are made up of warm colours and dark woods. For a modern looking kitchen, light wood looks great with light fresh colours and stainless steel appliances. But of course, if you have your heart set on glossy cupboards and high shine ultra modern doors, the stainless steel will begin to make the kitchen look impersonal, so choose carefully to achieve the look that you are really after.
Stainless Steel Kitchen Appliances
How much is a sheet of stainless steel worth in today's market?
I have 6 sheets of 2x6 sheets of stainless steel that are about a 16th of an inch thick...I don't need it and want to sell it but don't have a clue what it is worth...anybody know what stainless steel is worth these days?
junaidi71....you rule! thanks sooo much!
http://www.metalsdepot.com/products/stainless2.phtml?page=sheet&LimAcc=$LimAcc